GoPro MISSION 1 Series Footage

MISSION 1 PRO ILS— A new class of ultra-compact mirrorless cinema camera with the same sensor as MISSION 1 PRO, compatible with Micro Four Thirds (MFT) lenses.

MISSION 1— Same as MISSION 1 PRO, but with 8K30 video capture; 4K120 Open Gate; 4K120 and 1080p240 slo-motion frame rates.

Both cameras are built around a 1.0″ type 4:3 sensor, which is claimed to provide better low-light performance and image quality. They are being powered by GoPro’s new GP3 processor. The MISSION PRO can capture up to 8K60, 1080p at up to 960fps, and 4K at up to 240fps. The MISSION PRO ILS features an interchangeable M4/3 mount and the ability to record 8K Open Gate at up to 30fps.

Users have been asking for cameras like this from GoPro for more than a decade, and it’s good to see that they have now actually materialized. With increased competition in the action camera market with options from DJI and Insta360, GoPro needed to think outside of the box.

“The MISSION 1 Series is the pinnacle of performance for low-cost, compact cinema cameras. Our most demanding, pro-minded customers have asked us for years to make this very line of cameras, and we’ve finally delivered. The MISSION 1 Series is built to withstand the most extreme environments our customers push them into. The footage is going to look amazing.”

Nicholas Woodman, GoPro’s founder and CEO

Sensor

The 1.0″ type 4:3 sensor (7680 x 5760) is claimed to help provide better image quality and less noise, even in challenging low-light environments.

The sensor features a larger surface area and larger native 1.6µm pixels and 3.2µm fused pixels in Quad Bayer mode

Pixel size at 8K:

Pixel size at 4K:

The new 1″ type sensor is larger than what is being used in the DJI Osmo Action 6 and Insta360 Ace Pro 2.

The new GP3 Processor features a power-efficient 5nm design, enabling category-leading battery runtimes and thermal performance along with what is claimed to be best-in-class resolutions, frame rates, and image quality. An AI Neural Processor Unit (NPU) enables next-generation video pixel processing and stunning low-light image performance.

According to the company, the MISSION 1 Series delivers the highest-quality, with the least noise, and the highest dynamic range image from any GoPro ever. GoPro states a dynamic range of 14 stops.

Along with auto modes, users can utilize a full range of manual controls such as ISO, Shutter Speed, Exposure Compensation, and White Balance.

Recording Capabilities

The MISSION 1 PRO and MISSION 1 PRO ILS can capture 8K 16:9 video at up to 60 frames per second (2X Slo-Mo), ultra-smooth 4K 16:9 at up to 240 frames per second (8X Slo-Mo), and up to 10-second burst 960 frames per second in 1080p 16:9. You can also capture non-burst 1080p 16:9 (and 1440p 4:3) at 480 frames per second. According to GoPro, these are currently the highest frame rates and slowest Slo-Mo rates in the category. MISSION 1 enables 8K30, 4K120, and 1080p240 16:9 capture, along with 4K120 and 1440p240 4:3 video.

The MISSION Pro can capture up to 8K 60p in H.265 at 240Mbps. If you do the free firmware upgrade to use GoPro Labs, you can increase the bitrate to 300Mbps. Users can record in 10-bit GP-Log2 and Hybrid Log Gamma (HLG).

Along with being able to record 8K at up to 60fps, users can access very high frame rates for HD and 4K UHD capture. In HD, you can go as high as 960fps, and in 4K UHD, you can do up to 240fps. The only catch with these two modes is that you are limited to recording for up to 10 seconds at a time. This arguably isn’t a huge deal, as recording HD at 960fps for 10 seconds results in a clip that is 5 minutes and 20 seconds long! Even in 4K UHD 240fps, a 10-second clip would amount to 1 minute and 20 seconds of footage.

Footage is recorded to a Micro SD card. GoPro will have a comprehensive list of approved cards available.

The MISSION 1 PRO and MISSION 1 PRO ILS support 8K30 and 4K120 Open Gate Video, enabling full sensor 4:3 captures for added flexibility for reframing, editing, and exporting content in multiple aspect ratios. The base series MISSION 1 model supports 4K120 Open Gate video capture. It is good to see Open Gate recording with a GoPro camera. With so many productions now requiring multi-aspect deliverables, being able to utilize the full height of the 4:3 sensor makes this a lot easier. The only slight caveat is that GoPro doesn’t offer any framelines on its displays, which can make framing difficult.

Additionally, if you upgrade your camera using the free GoPro Labs firmware, you can unlock true 24p recording.

The optional Media Mod for MISSION 1 Series Cameras has a Micro HDMI that can output 4K up to 60p, so you can record externally or use a monitor, etc.

GPro also offers Live Protune Metering, which gives users real-time on-screen readouts for white balance, EV, ISO, and shutter values

You can also do Timecode Sync to sync multiple MISSION 1 Series cameras together for multi-camera editing in Final Cut Pro, Adobe Premiere, Davinci Resolve, etc.

Interchangeable M4/3 mount

The MISSION 1 ILS features an interchangeable M4/3 mount that allows you to utilize a wide array of affordable lenses. Now, you need to be aware that the camera doesn’t have any AF capabilities with this mount, so only manual M4/3 mount lenses will work. GoPro told me that they are looking into possibly offering some type of AF support in the future.

Capture Modes

Both MISSION 1 Series cameras feature 11 capture modes that use advanced algorithms to fine-tune settings based on motion, lighting, environment, and the presence of people.

Highlights

• Subject Tracking: Automatically keeps your subject centered so you can focus on the moment rather than framing the shot
• Dive: Tunes video stabilization and settings to capture clear, colorful, stable footage below the surface
• Low Light: Delivers high-quality footage in challenging lighting conditions while enhancing brightness and reducing noise

Other Capture Modes available include Video, Slo-Mo, Photo, Lapse, Sport POV, Vlog, Open Gate, Endurance, and Looping.

Battery Life & Heat Management

One of the biggest complaints from users of GoPro cameras was arguably battery life, so GoPro has looked at this carefully, and you can now record up to 5+ hours in 1080p30 using the fast-charging 2150mAh Enduro 2 battery. This is approx. 70% longer than the HERO13. If you switch to 4K30 you can record up to 3+ hours, which is approx. 80% longer than the HERO 13. In 8K open gate on the MISSION PRO ILS, you can record for up to 96 minutes at 30fps.

This is all possible due to the improved power efficiency of the GP3 processor and the 13% higher capacity of the 2150mAh Enduro 2 battery. GoPro has also improved the hardware heat management, which helps prevent thermal shutdown.

The Enduro 2 battery is also compatible with HERO13 Black cameras and likewise, the MISSION 1 Series cameras can work with the older HERO13 Black Enduro battery, albeit with shorter runtimes

Faster charging can be done using PD2.0 with PPS technology. GoPro Enduro 1 batteries can be used with MISSION 1 Series cameras, but they will deliver slightly decreased performance.

Now, the record times do change depending on the recording modes you are using. In 4:3 8K at up to 30p, you can get around 96 minutes of record time. If you are recording 16:9 8K 50/60p or 4K 19:6 200/240p without the camera having any airflow, the record times drop down to around 35 minutes. These runtimes were measured at a temperature of 77° F (25° C) with a wind speed of 0.6m/sec with the Wide digital lens; wireless connections, Bluetooth, and HyperSmooth on; front and rear LCD screens on with a 1-minute screensaver; and voice control and GPS off.

Size & Weight

Despite their increased capabilities, the MISSION 1 series cameras are not massively bigger than a GoPro HERO13.

Stills

The MISSION 1 Series offers a 50MP Photo Mode. You can utilize manual control of ISO, Shutter Speed, White Balance, and Exposure Compensation while shooting 50MP RAW images. For casual users, there is a SuperPhoto mode that leverages GP3’s advanced image-tuning algorithm to determine the best settings based on conditions, to deliver ready-to-share 12MP images.

Audio

GoPro has added some decent audio recording options, including the ability to capture 32-bit float, and you can also use Bluetooth 5.3 connectivity to pair various wireless devices, including GoPro’s new Wireless Mic, which I will talk about in a bit.

• 4 Mics: Record improved stereo audio signal with advanced wind noise reduction
• 32-Bit Float: Record audio with an extended dynamic range without distortion or clipping (I believe this is only possible with the optional Media Mod)
• Bluetooth 5.3 Connectivity: Pair wireless mics for social content or pair earbuds for voice commands far from the camera. The new Wireless Mic Complete Kit is the perfect companion to capture crystal-clear audio
• USB-C Audio Support: Plug an external USB-C microphone or USB-C to 3.5mm adapter into the camera’s USB-C port for an easy plug-and-play way to add a separate mic or headphones to your setup

The optional Media Mod for MISSION 1 Series Cameras is probably worth getting as it features an integrated 3-mic array, three 3.5mm audio ports for microphone input, timecode input, live headphone monitoring, and a 4K Micro HDMI-out.

Wireless Mic Complete Kit

GoPro is also entering the wireless microphone market with its own Wireless Mic Complete Kit that comes with 2 transmitters and a combo TRS/USB Receiver, as well as a charging case.

The two ultra-compact microphone transmitters can be worn or hidden.

• Compatible with smartphones, mirrorless, and GoPro cameras
• Ultra-lightweight mic transmitters weigh less than 10g (two sheets of printer paper) for easy wearability
• Capture high-quality 24-bit (wide dynamic range) audio at 48 kHz sampling rate (high-frequency response)
• Connect from up to 492ft (150m) away

Other Features

MISSION 1 Series cameras are waterproof to 66ft (20m) without a housing. There is also a removable lens hood and raised buttons that make it easier to access when wearing gloves.

GoPro also includes a hydrophobic lens cover to help repel water droplets, and there is a touch-responsive 2.59″ OLED rear screen that pairs with a 1.4″ front LCD.

GoPro Labs

GoPro Labs extends camera capabilities beyond the stock firmware features, allowing full user control and further features, including:

• Increased bit rate up to 300Mbps
• Display on-screen histogram to evaluate exposure and prevent clipping
• True 24.0 fps capture
• Chapter files up to 100GB
• On-screen spirit level

Media Mod

As I mentioned earlier, there is an optional Media Mod available that is more suitable for anyone doing serious video production.

• Premium multi-pattern 3-mic array with beamforming technology supports Cardioid, Rear Cardioid, Bidirectional, Omnidirectional, Focused Stereo, Natural Stereo, Immersive Stereo, and Variable Stereo pickup patterns
• Three 3.5mm audio ports for external mic input, timecode input, and low-latency headphone monitoring
• 32-bit float encoding support via built-in or external microphones
• Micro HDMI port supports 4K60 video output to external monitors, recorders, or switchers
• Built-in cold-shoe mount for accessory integration
• 3 mounting options: built-in mounting fingers, 1/4-20 mounting threads, and Magnetic Latch Mount

ND Filter 4-Pack

The optional ND Filter 4-Pack comes with ND8 / ND16 / ND32 / ND64 strengths.

The MISSION 1 cameras can uuto-detect adjusts settings, and ND metering to recommend a higher or lower density filter depending on available lighting, although you can also turn this off.

Three Mounting Options

The MISSION 1 Series supports three mounting options:

• Magnetic Latch Mounting: For quick swaps between mounts
• Traditional GoPro Fingers: For a more secure mounting point in rough conditions
• 1/4-20 Mounting Threads: For full professional accessory integration

Protective Housing

While the camera is rugged and waterproof right out of the box, the protective housing can be used if you need it. What is interesting is that GoPro has included both horizontal and vertical mounting points on the protective housing.

• Increases camera waterproof rating to 196ft (60m) for deep-water diving
• Protects against flying debris and dirt during high-speed action
• Built-in mounting fingers let you capture horizontally and vertically.

Vertical Mount Adapter

GoPro has a social media-friendly vertical mounting adapter.

• Integrated 1/4-20 locking wheel makes it easy to mount your cameras
• 3 mounting options: built-in mounting fingers,
  1/4-20 mounting threads and Magnetic Latch Mount compatibility
• Made of aluminum for extended durability
• Backwards compatible with all GoPro cameras with built-in 1/4-20 mounting (HER013, HERO12)

MISSION 1 PRO GRIP EDITION

The MISSION 1 PRO GRIP EDITION was designed to help transform your GoPro into more of a point-and-shoot camera. It features a grip on the side that makes the camera easier to hold.

• Designed + optimized for photography
• Professional-style shutter button mechanism
• Integrated cold-shoe and 1/4-20 mounts for additional accessory compatibility
• Compatible with Magnetic Latch Mount ecosystem for quick and easy setup adjustments

The Point-and-Shoot Grip is also sold separately and is compatible with all MISSION 1 Series cameras.

MISSION 1 PRO CREATOR EDITION

The MISSION 1 PRO CREATOR EDITION includes the Media Mod, Volta 2 Battery Grip, Wireless Mic Complete Kit, Magnetic latch Mount, and a Carrying case.

• Media Mod: adds essential I/O port expandability to unlock audio and video production accessories
• Volta 2 Battery Grip: A battery that delivers over 8 hours of runtime at 4K30
• Wireless Mic Complete Kit: Delivers clear, high-quality wireless, ultra-lightweight microphone transmitters
• Magnetic Latch Mount: For quick and easy setup adjustments
• Carrying Case: Keeps your entire setup organized

MISSION 1 PRO ULTIMATE CREATOR EDITION

The MISSION 1 PRO ULTIMATE CREATOR EDITION is an all-in-one kit that includes everything but the kitchen sink. It comes with the company’s GoPro Fluid Pro AI Multi-Device Gimbal Stabilizer with AI Tracking and the Light Mod 2, as well as the other accessories you get in the CREATOR EDITION.

• Fluid Pro Al: Provides video stabilization plus the power of Al tracking and a built-in fill light
• Media Mod: Adds essential I/O port and cold-shoe expandability to unlock audio and video production accessories
• Light Mod 2: Powerful, compact LED with increased battery life, runtime, and brightness
• Volta 2 Battery Grip: A battery that delivers over 8 hours of runtime at 4K30
• Wireless Mic Complete Kit: Delivers clear, high-quality wireless, ultra-lightweight microphone transmitters
• Magnetic Latch Mount: For quick and easy setup adjustments
• Carrying Case: Keeps your entire setup perfectly organized

Pricing & Availability

The MISSION 1 PRO is available to pre-order, and it will start shipping on May 28th. The prices are below:

The MISSION 1 PRO ILS will be available in Q3 2026.

The MISSION 1 PRO GRIP EDITION is available to pre-order on May 21st, and it will start shipping on the 28th of May.

The MISSION 1 PRO CREATOR EDITION will be available in Q3 2026, as will the MISSION 1 PRO ULTIMATE CREATOR EDITION.